AR52 5 Channel Micro Receiver w/Std Servo Plug
AR52 series receivers are a micro sized 5 channel receiver featuring full sized standard servo ports. Also a unique auto-binding system that is very user friendly. These are compatible with many readily available servos with standard JR or Futaba style 2.54mm pitch 3P servo connectors. These receivers also have two pads on the pcb that can be bridged with solder to allow one channel to drive two servos (aileron). No Telemetry is supported.
1) Size: 27.5*13.0*9.2mm (not including antenna)
2) Weight: 1.91g
3) Working voltage: 4.2~9.0V
4) Supports double aileron servo mode (same-channel)
5) Optimized Auto binding program, Many available protocols: Futaba SFHSS, FRSKY-D8, FRSKY-D16, Flysky AFHDS-2A
6) Servo connectors: Standard JR or Futaba style 2.54mm pitch 3P servo connectors
Auto binding: All of the Crossover-rx receivers have a really awesome auto-binding function.
The receiver will enter the binding mode automatically after power is applied and it doesn’t receive a transmitter signal for 15 seconds. This is indicated by the slow flashing blue LED light changing to a rapid flash. The receiver is now in the binding mode, complete the binding operation according to your transmitter’s binding instructions.
Dual aileron servo mode:
Default on this receiver is dual aileron servo mode, you can turn off the dual aileron servo mode by bridging the two “P ports” as seen on the circuit diagram picture, then AIL2 will be set as AUX2 output. This function is for planes with dual aileron servos, it can simplify servo connection and transmitter set up.
NOTE: The effective control range of the TELEM function depends on the transmitter, it is quite often that the working range of the receiver is far more than TELEM function effective range.