Buzzard Models 6A Brushless ESC 2-4S BEC 5V/.5A 6gram
This latest generation 4-layer PCB board ESC is small, light, and efficient. It features an Atmel® ATmega8A AVR microcontroller and an advanced latest generation UTC LM2940 low dropout linear BEC voltage regulator. This is a very compact and light ESC, without any wires or heatshrink, it only weighs 1.8 grams. It also features a high quality linear BEC circuit, which runs very cool compared to cheaper speed controls.
Features:
Pre-installed JST plug for the battery
Overheat protection
Automatic throttle range calibration
Compatible with Lipo, Li-ion, Ni-MH, and NiCd batteries
Programmable low-voltage cutoff threshold
Programmable reverse rotation
Optional soft-startup mode
Programmable cutoff mode
Programmable timing
Heli governor mode
All parameters can be programmed from the transmitter, including default settings
Specs:
Amps: 6A continuous 8A burst
Cells: 2-4S Lipo Li-ion 5-12 Ni-MH NiCd
BEC Voltage: 5.0V
BEC Current: 0.5A
BEC type: LBEC
Timing: Auto
Cutoff Voltage: programmable
Size: 22x12x5.0mm
Weight: 6.4g (with wires and JST plug) 1.8grams without wires or heatshrink.
Instructions are here: https://www.buzzardmodels.com/assets/images/instructions/Buzzard Models 6A ESC instructions updated 1-27-2023.pdf
[ITEMPRICE]