CM410X 4Ch DSMX Compatible 4CH 2.4GHz Rx
A four channel DSMX/DSM2 receiver with micro molex 1.25mm connectors.
A version of the CM421 with micro molex 1.25mm pitch connectors which fit the HK5320 and HK5330 servos that I also sell.
Description:
Used for aircraft with capable transmitters JR, Spektrum DX6I DX18 DX8 DX9 DEVO10.
Type: DSM2 high-speed 4-channel receiver.
Specification:
Channels: 4CH +PPM Port
Modulation: DSM2
RF Range: 2.4GHz
Operating Voltage: 3.3V-15V
Weight: 2.1g
Size: 30x16x4.3mm / 1.19x0.64x0.14inch
Binding Procedures
Set transmitter to transmit in DSM2 protocol.
Separate transmitter from receiver by a few feet.
Install a bind plug on the receiver.
Hold down bind-button and then connect power to the receiver. Receiver LED should quickly flash orange. Release bind-button.
Initiate binding from the transmitter.
Receiver LED will change from flashing quickly, to a slower flash, and will illuminate solid a few seconds later once it binds.
Remove the binding plug after the bind is completed.
Restart the receiver by removing power and adding it back. Receiver LED should illuminate continuously. All channels should function properly now.
[ITEMPRICE]