Crossover-RX LSM1300S Ultra Micro Linear Servo 1.00mm JST
These are advertised as a 1.3g sized servo. Most of them I have weighed are around 1.5g complete with wire.
These come with a 110mm (~4”) 32awg connector wire with the micro JST-SH 1.00mm pitch connector that fits many receivers.
These are low voltage servos intended for single cell lipo use.
Please note the polarity of the JST SH micro connector.
These work to replace the servo mechanisms on the Crossover-RX brick receivers by removing three screws and soldering two wires.
Travel: 8 mm
Size: 27.5 x 13.0 x 9.2mm
Plug: micro JST-SH 1.00mm pitch